Chúng tôi rất tiếc, website không hỗ trợ trình duyệt của bạn.
Để sử dụng hết các tính năng mới, bạn vui lòng sử dụng 1 trong các trình duyệt dưới đây:
  • Internet Explorer 9 (Download)
  • Firefox (Download)
  • Chrome (Download)

    Hỗ trợ trực tuyến

      Skype Me™!
      Skype Me™!
       
    support@ansgroup.asia 

    0911 47 22 55 

    canh.ans@ansvietnam.com

    0938.214.498

     

    Thăm dò ý kiến

    Currently no active poll.

    Thống kê website

    • Thành viên online Thành viên online
      • Tổng cộng Đang online 2
      • Khách Khách 2
      • Thành viên Thành viên 0
      • Tổng cộng Lượt truy cập 0284777

    Stock

    Danh sách thiết bị hãng Urban - Urban Vietnam - ANS Vietnam 

    Đăng bởiAdmin

    Optima Evolution

     

    Sub bench saw With this modern sub bench saw all requirements are fulfilled that are assumed by the automatic PVC blank. This solution is available as standard-alone machine as well as in combination with the profile processing centre MFC Evolution. Throu...[...details]

    BAZ "Basic" Line

     

    Cutting- and processing centre BAZ 1000 “Basic”- Line The cutting- and processing centre model BAZ 1000 in the „Basic“-version is ideal for company sizes with a capacity of approximately 80 to 160 window units per shift. The modula...[...details]

    BAZ 100 "Medium/Tandem" Line

     

    Cutting- and processing centre BAZ 1000 “Medium/Tandem”- Line The cutting- and processing centre model BAZ 1000 in the „Basic“-version is ideal for company sizes with a capacity of approximately 160 to 300 window units per shift. T...[...details]

    FTB EVO-S

     

    uPVC Cutting and Machining Centre The fully automated bar-advance centre, FTB EVO-S, provides window and door profile processing at the highest stage for up to 160 window units per 8 h. Numerous combinations of individual function modules allow an ideal m...[...details]

    SGS

     

    SGS Precision mitre saw For mitre cuts of aluminium- and vinyl profiles up to 15°. swivel range from 15° left to 15° right precise hard chrome-plated aggregate-double shaft guide saw blade dimension 500 mm stable basic set-up for high precision when long ...[...details]

    TLG-352 SA

     

    Precision mitre saw semi-automatic because of manual saw feed tiltable to both sides 45°-90°-45°-0° (lockable), intermediate angles possible vertical guide of the machining unit in hard-chromium-plated double shaft guiding manual saw feed as well as verti...[...details]

    TL-500 A

     

    Precision mitre saw tiltable to both sides 45°-90°-45°-0° (lockable), intermediate angles possible vertical guide of the machining unit in hard-chromium-plated double shaft guiding hydro-pneumatic saw feed as well as horizontal and vertical pneumatic work...[...details]

    ZS 85 / ZS 135 / ZS 170

     

    Radial saw ZS 85, ZS 85/N, ZS 135, ZS 135/N, ZS 170, ZS 170/N, ZS 200, ZS 200/Na scale for intermediate angles strong and stable construction...[...details]

    TRIM 300 NR

     

    Cross-cut and mitre saw sintered carbide sawblade (HM): Ø 300 mm mitre: 45° right side and 45° left side possible manual profile clamping, horizontal aluminium table plate with length stop ...[...details]

    UNI 40 AI / MP

     

    Mitre saw with 1 maching head for window and door production especially suitable for cutting aluminium and vinyl profiles and similar materials a turnable rotary table that rotates around the vertical axis permits angle cuts 45° to the right and left side...[...details]

    DGU 500

     

    DGU 500 Double Mitre Saw Double mitre saw with saw blade Ø 500 mm Semiautomatic operation Right head is manually adjustable Both heads can manually get adjusted by 45° to the outside and 30° to the inside....[...details]

    DGS 100

     

    Double mitre saw precision, no-burr cutting of PVC-Profiles. high quality of cutting and low-noise operation efficient and monitored waste disposal ...[...details]

    UNI 332 / UNI 400 P

     

    Double mitre saw UNI 332 P with saw blade diameter of 330 mm UNI 400 P with saw blade diameter of 400 mm semi-automatic operation-right head adjustable via hand wheel manual adjustment (stepless) of both heads by 45°towards left side and right side...[...details]

    DGS 200

     

    Double mitre saw Precision, no-burr cutting of Aluminium and PVC-profiles high quality of cutting and low-noise operation efficient and monitored waste disposal ...[...details]

    DGL 200

     

    Double mitre saw Precision, no-burr cutting of Aluminium and PVC-profiles. high quality of cutting and low-noise operation efficient and monitored waste disposal; waste conveyor belts (optional) increased operational convenience...[...details]

    DGL 250

     

    Double mitre saw Precision, no-burr cutting of wood, aluminium and plastic profiles. high cutting quality efficient, controlled disposal of offcuts, waste conveyor belts (optional extra) ...[...details]

    E 500

     

    Electronic Control Solid and economic control technology with convincing performance characteristics for double mitre saws: Positioning and section cutting control E 500 Single cut as well as programs and modifications of machine parameters are entered a...[...details]

    PCE 5000

     

    Electronic control Top level control technology with outstanding performance characteristics for modern window manufacturing on double mitre saws. Positioning and section cutting control PCE 5000 based on the Windows XP operating system. Entry and editin...[...details]

    GLZ

     

    Glazing bead saw for exact cutting of glazing beads made of wood, aluminium or pvc cutting range: 45° or 90° sintered carbide (HM) saw blade: Ø 150 mm stationary adjustable length stop fixing by frame or plate clamps dimension of bead is measured directly...[...details]

    GLS 102 / 200

     

    Glazing bead saw GLS 102 with manual feed GLS 200 with automatic feed With our bead saws GLS 102 and GLS 200 for cutting two (or optionally even four) pvc beads in an angle of 45° we developed for you two very robust and flexible machines that are easy to...[...details]

    TRS 275

     

    Metal saw for all-day use head turnable to the left side and to the right side by 45° worm gear in oil bath diaphragm pump and filter for coolant...[...details]

    NEW 250

     

    Metall cutting saw for several-hours use per day head turnable to the left side and to the right side by 45° transmission gear in oil bath diaghragm pump for cooling the blade...[...details]

    NEW 350

     

    Semi-automatic metall cutting saw for all-day use or shiftwork head turnable to the left side and to the right side by 45° transmission gear in oil bath electric pump for cooling the blade...[...details]

    S 320

     

    Metal cutting band saw for all-day use or shift work modern and solid construction ergonomically arranged operating elements optimal chip discharge by special construction of chip container, ideal for installation of a chip extraction unit...[...details]

    Special 215/M / 315/M

     

    Band saw for several-hours use per day. Special 215/M und Special 315/M ...[...details]

    Special 315/S

     

    Band saw for all-day use vertical turning on bolts with adjustable cone bearings without space two driving speeds with pole changeable motor, gear with structural grade worm shaft strong band guides with with close takeup bearings and adjustable carbide w...[...details]

    SP 92

     

    Double-cut bar saw main cut / length cut in the range of 45° to 90° by scale or (optionally) by stops free cut for rubber gasket in the range of 30° to 53° by scale or (optionally) by stops; axial shift of the sawing unit for the free cut against a pre-ad...[...details]

    STS

     

    Overlap saw pneumatic clamping of the sash by 5 adjustable pneumatic cylinders manual feed with flush cutting of the overlap maintenance unit: filter pressure control with automatic drainage pressure regulator for adjusting the clamping cylinders powerful...[...details]

    KSU 102

     

    Manual V-Notch Saw for the cutting of V-notches in vinyl stable metal sheet angle frame with waste slide the guide carriage moves on hardened and polished shafts in linear slide bushings...[...details]

    KSSP 250 N

     

    Pneumatic V-cutting saw for making V-cuts into vinyl profiles or aluminium profiles. solid metal angle frame with waste chute and adjustable feet protective cover at the front and at the rear part guide carriage on structural grade steel guides in linear ...[...details]

    Mobile exhausts

     

    Universally applicable. Flexible. Compact dimensions and low weight. Solid construction with quality components. Mobile by turnable rollers. Volume of chip bag: 175 l Volume flow: Mobil 160: 2200 m³/h Mobil 200: 2500 m³/h Surface of filter: Mobil 160: 2...[...details]

    LAEG 2600 / LAER 2600

     

    Length stop The well-conceived and low-wear design of Urban’s length stop LAEG 2600 and LAER 2600 is the base for an efficient use in your production. LAEG 2600 with straight stainless steel support (V2A) for glazing beads LAER 2600 with roller conv...[...details]

    RO, RO/L

     

    Roller conveyor/length stop Infeed roller conveyors with 1 m, 2 m, 3 m, 4 m, 5 m or 6 m length and length stops. (Length measuring device with scale or electronic digital display) available in different lengths (3 m, 4 m, 5 m or 6 m) and versions. Fitting...[...details]

    TPS 1604

     

    Screwdriver in bar type design manual feed bar type design (not by KGS). ...[...details]

    TPG 1604

     

    Screwdriver in handle type design manual feed bar type design (not by KGS). ...[...details]

    KSG 1896/4

     

    Short screwdriver in handle type design ...[...details]

    KSG 1898/4

     

    Short screwdriver in handle type design, pneumatic elevation forwards and backwards ...[...details]

    DSG 2004

     

    Screw driver in handle type design with (or wothout) tube package automatic screw feed by external machine (ASS 60, ASS 80, ASS 90) control impulse for screw feed via direct connection or via depth switch-off depth switch-off simular...[...details]

    DSS 3004

     

    Srewdriver in bar type design with (or wothoot) tube package automatic screw feed by external machine (ASS 60, ASS 80, ASS 90) control impulse for screw feed via direct connection or via depth switch-off depth switch-off simular...[...details]

    DSG 3104

     

    Srewdriver in handle type design with tube package automatic screw feed by external machine (ASS 60, ASS 80, ASS 90) control impulse for screw feed via direct connection or via depth switch-off depth switch-off simular...[...details]

    DSS 3104

     

    Srewdriver in bar type design automatic screw feed by external machine (ASS 60, ASS 80, ASS 90) control impulse for screw feed via direct connection or via depth switch-off depth switch-off simular...[...details]

    ASS 60

     

    Automatic screw advance units Automatic selection and transportation of screws to the appropriate screw unit. Automatic turn-off of pivot device in case of non-use Compact due to integrated pneumatic control Low-wear due to high quality steel hopper...[...details]

    ASS 80

     

    Automatic screw advance units Automatic selection and transportation of screws to the appropriate screw unit. Automatic turn-off of pivot device in case of non-use Compact due to integrated pneumatic control Low-wear due to high quality steel hopper...[...details]

    ASS 90

     

    Automatic screw advance units Automatic selection and transportation of screws to the appropriate screw unit. Automatic turn-off of pivot device in case of non-use Compact due to integrated pneumatic control Low-wear due to high quality steel hopper...[...details]

    DS 1700 / DS 1750

     

    Screwing units DS 1700 operator-friendly due to release of screwing cycle via foot switch feed unit with automatic depth switch-off automatic screw feed into screwdriving unit...[...details]

    DS 2100

     

    Screwing unit These units simplify and make more efficient the screwing processus. operator-friendly due to release of screwing cycle via foot switch feed unit with automatic depth switch-off automatic screw feed into screwdriving unit...[...details]

    DS 2100 VE

     

    Screw advance unit with cycle unit pneumatic and with integrated screw feed pneumatic linear clocking unit with precision guides width positioning by turret stop, adjustable to eight different positions large support area for simultaneous machining of two...[...details]

    DS 4000 E

     

    Variant of the screw feed units with larger capacity. CPC control Screw spacings infinitely mechanically adjustable Separate feed units, therefore RH screwing unit can be switched off...[...details]

    AMS 6010

     

    Screwing unit The fully automatic screwing unit AMS 6010 for screwing steel reinforcements in vinyl window profiles offers proven Urban quality, best operating comfort, highest precision and an excellent price-performance ratio. A clearly arranged CPC con...[...details]

    DSG 2004 K

     

    Hand held screwdrivers for efficient screwing of nipple screws automatic screw feed by external machine ASS 60 K adjustable torque control pulse for screw feed via direct connection or via deph switch-off...[...details]

    DSS 3004 K

     

    Hand held screwdrivers for efficient screwing of nipple screws automatic screw feed by external machine ASS 60 K adjustable torque control pulse for screw feed via direct connection or via deph switch-off...[...details]

    SFZ

     

    Oscillating conveyor feed system with feeding unit for clamping nipple screws high capacity exact adaptation to screws and application oscillation compensation in the unit...[...details]

    ASS 60 K

     

    Autom. screw advance unit for nipple screws connection for one screwdriver suitable for sorting and feeding of self-tightening nipple screws to the screwing unit automatic disconnection of the swivel device when not in use compact due to integrated pneuma...[...details]

    DS 2100 K

     

    Screw advance unit for nipple screws with integrated screw feed easy attention via foot-operated switch advance unit with automatic depth switch-off profile clamping by swivel clamping...[...details]

    DB 1000

     

    Dowel hole drill advance unit Suitable for all drillings in the profile bar long-life and compact due to very high-grade, low-wear components operator-friendly release via foot switch adjustable automatic switch-off of electric motor after drill cycle via...[...details]

    DB 1000 V

     

    Dowel hole drill advance unit with cyling unit pneum. SPS control pneumatic linear clocking unit with precision guides width positioning by turret stop, adjustable to eight different positions...[...details]

    DB 3100

     

    Dowel hole drill advance unit Suitable for all drillings in the profile bar long-life and compact due to very high-grade, low-wear components operator-friendly release via foot switch adjustable automatic switch-off of electric motor after drill cycle via...[...details]

    DB 3200

     

    Dübellochbohrvorschubeinheit Stufenlos einstellbarer Zweispindelbohrkopf. Breite Auflagefläche zum gleichzeitigen Bohren von zwei Löchern in ein oder zwei Werkstücke. Ergänzungsvarianten ...[...details]

    UG 1

     

    Height-adjustable substructure designed for all screw feed advance units mounted above and dowel hole drilling units mounted below (suspended units), with layout for all screw advance units on top and dowel hole drill units at bottom. Roller conveyor, hor...[...details]

    UG 2, UG 3

     

    Height-adjustable substructure adjustable in height for DB and DS, designed for all drilling feed devices for screw and dowel holes (mounted from above). These elements allow incorporation of the screw feed units DS 2100 - 4000 and the dowel hole drilling...[...details]

    UG 5000

     

    Machine main base or dowel hole drill unit and screwdriver These elements allow integration of the screw feed units DS 2100 ⁄ 4000 and the dowel boring units DB 1000 ⁄ 3200 into a production line. * The height of the UG 5000 is notadjustable. ...[...details]

    M 14 WS 203    
    End milling machine 
    for manually operating  for aluminium
    and vinyl profiles...
    >>>> more
    Water drainage router
    Water slot milling unit The new water slot milling
    units WS 203 – WS 203 HF...
    >>>> more
       
    A 23 PBZ    

    Copy router
    two machining heads, manual
    feed of the ...
    >>>> more

    Profile processing centre
    in order to carry out the entire machining
    of all profile ...
    >>>> more

     

    M7 CRH

     

    End Milling Machine also for millings of 0° to 45° machine base pneumatic clamping quick change system ...[...details]

    M12 / M14

     

    M12 End milling machine for manually operating for aluminium and vinyl profiles tiltable stop according to scale 45°-90°-45° fourfold stop pneumatic clamping quick change system for cutters machine base...[...details]

    AKFM 250

     

    End milling machine for milling both sides of vinyl window profiles under 90° The adjustment of the profile bar length of a minimum of 450 mm to a maximum of 3000 mm allows exact positioning of +/- 0.1 mm of the servomotor at the right machining unit. Exa...[...details]

    AKF 6/250

     

    AKF 6/ 250 – End milling machine Tiltable stop according to scale 20°-90°-20°, pneumatic clamps horizontal and vertical, machine base, cutter spindle is stabilized by upper bearing, that means: cutter operation without vibrations ...[...details]

    WS 203, WS 203 HF

     

    Water slot milling unit The new water slot milling units WS 203 – WS 203 HF impress with their sensational price-performance ratio and adapt ideally and individually to a wide variety of processing requirements. Most modern laser manufacturing tech...[...details]

    A 20

     

    Copy router one machining head with universal copying template two horizontal clamps two separate copying tracers with a diametre of 5, 8 and 10 mm each two-blade milling cutter, 5 mm and 8 mm, shaft: 8 mm with lateral stop and four hinged stops...[...details]

    A 23 A / A 23 AZ

     

    Copy router two machining heads manual feed of the olive drilling unit two horizontal pneumatic clamps with universal copying template copying tracer with a diameter of 5, 8 and 10 mm two-blade milling cutter, 5 mm, 8 mm shaft: 8 mm...[...details]

    A 25 A / A 25 AZ

     

    Copy router two machining heads manual feed of the olive drilling unit two horizontal pneumatic clamps with universal copying template copying tracer with a diameter of 5, 8 and 10 mm two-blade milling cutter, 5 mm, shaft: 8 mm...[...details]

    MP 34 / MP 38

     

    MP 34 hand drilling and lock case milling machine for quick and economic production of handle drillings and lock case millings automatic cycle with pneumatic workpiece clamping centering device for centered handle position fix stops, right side and left s...[...details]

    MFC Evolution

     

    Profile processing centre Highly flexible and universally applicable for processing of PVC profiles. Proven machine building quality in connection with modern and sophisticated control technology set new standard regarding: Flexibility: all profiles are p...[...details]

    PBZ

     

    Profile processing centre PBZ in order to carry out the entire machining of all profile types in window and entrance door production in one operation, we mounted all machining units on a turntable that can be positioned from 0° to 360°. Thanks to this des...[...details]

    AKS 1150 AKS 3950  
    Single-head welding machine
    A solid and wear resistant construction of
    the Urban welding machine AKS 1150 is the basis ...
    >>>> more
    Double-head welding machine
    With the double-head welding machine AKS 3950 you
    weld two corners in an angle of 90° in...
    >>>> more
     
    AKS 6400 AKS 8400  

    4-head welding machine
    With the horizontal multi-head welding
    machines AKS 6405 and 6410 we developed ...
    >>>> more

    4-head welding machine, vertical
    With the AKS 8400 we designed a high quality and
    extremely flexible machine...
    >>>> more

     

    AKS 1020

     

    Single-head welding machine With our butt welding machine AKS 1020 with weld seam limitation of 2.0 mm you are able to weld vinyl window profiles in an angle from 30 to 180°. The machine convinces by a sensational price-performance ratio as well as stabil...[...details]

    AKS 1150

     

    Single-head welding machine A solid and wear resistant construction of the Urban welding machine AKS 1150 is the basis for a long life in your production. AKS 1150 with weld seam limitation of 0.2 mm and 2.0 mm. Due to the parallel welding process you get...[...details]

    AKS 3511

     

    Transom welding machine Sophisticated technology and proven URBAN quality – this is the transom welding machine AKS 3511: solid, space-saving and reliable. The AKS 3511 optimally fits into your production. With this machine you can realize transom a...[...details]

    AKS 3900

     

    Double-head welding machine With the double-head welding machine AKS 3900 Urban combines proven quality with good price: the AKS 3900 stands for a modern machine base conception in conjunction with a consequent and efficient construction. AKS 3900 with we...[...details]

    AKS 3950

     

    Double-head welding machine With the double-head welding machine AKS 3950 you weld two corners in an angle of 90° in only one working step. The AKS 3950 stands for a modern machine base conception in conjunction with a consequent and efficient constructio...[...details]

    AKS 5300

     

    Variable multi-head welding machine AKS 5305 with weld bead restriction 2 mm AKS 5310 with weld bead restriction to 0,2 mm by means of stainless steel blades a variable automatic multi-head welding machine series which allows the combination of different ...[...details]

    AKS 5600

     

    Double-head welding machine With the double-head welding machine AKS 5600, two transom connections can get welded in one work step only. Due to the integrated turning device, two parallel transoms or an H-element can get processed. The AKS 5600 represents...[...details]

    AKS 6250

     

    Horizontal 4-head welding machine With the horizontal 4-head welding machine AKS 6250 with adjustable weld seam limitation of 0.2 mm to 2.0 mm we developed for you a very flexible and high-quality welding machine that optimally meets your requirements. Al...[...details]

    AKS 6400

     

    Horizontal 4-head welding machine With the horizontal multi-head welding machines AKS 6405 and 6410 we developed for you a very flexible and high-quality welding machine that optimally meets your requirements. AKS 6405 with weld seam limitation of 2.0 mm ...[...details]

    AKS 6600 4-Head

     

    Horizontal 4-head welding machine With the horizontal multi-head welding machines AKS 6605 and 6610 we developed for you a very flexible and high-quality series of machines that optimally meet your requirements. AKS 6605 with weld seam limitation of 2.0 m...[...details]

    AKS 6600 6-8-Head

     

    6-8-head welding machine With the horizontal multi-head welding machines AKS 6605 and 6610 we developed for you a very flexible and high-quality series of machines available in different versions (with six or eight welding heads). The AKS 6600 can be used...[...details]

    AKS 6900

     

    4-/6-/8-head welding machine With the horizontal multi-head welding machine AKS 6905 and 6910 we designed a high-end and extremely flexible machine series for your needs. The AKS 6900 I-Pos welding machine is available in many sizes (with four, six or eig...[...details]

    AKS 8400

     


    Our highlights

    SV 405   SV 530  
    Corner cleaning machine
    Modern design, compact build-up and proven
    Urban quality – this is the CNC controlled ...
    >>>> more
      CNC-Corner cleaning machine
    With the SV 530-B we developed for you a very flexible
    weld seam cleaning machine for vinyl window...
    >>>> more
     
    SV 840      

    Corner cleaning machine
    The CNC controlled double-head corner
    cleaning machine SV 840/X guarantees a...
    >>>> more

     

    SV A-21

     

    Combination of welding machine and end milling machine With the SV A-21 we combined two functions in one machine: as a combination of welding machine and end milling machine for pvc window profiles the SV A-21 convinces by its space-saving utilization and...[...details]

    SV 290

     

    Corner Cleaning Machine With the corner cleaning machine SV 290 we developed a compact, modern and neatly arranged corner cleaning machine with scanning sealing drill aggregate. Flexibility and a constantly high processing quality is therefore guaranteed ...[...details]

    SV 305

     

    Corner cleaning machine With the corner cleaner SV 305 we developed for you a compact,modern and clearly arrangedcleaning machine with inner corner cleaning and drilling units ensuring high machining quality inyour production.As a standard the SV 305 is e...[...details]

    SV 405

     

    Corner cleaning machine Modern design, compact build-up and proven Urban quality – this is the CNC controlled corner cleaning machine SV 405 for the rational processing of vinyl window profiles. The machine convinces with a favourable price-performa...[...details]

    SV 410-B

     

    Corner cleaning machine Solid construction and proven Urban quality – this is the CNC-controlled weld seam cleaning machine SV 410 for the efficient machining of vinyl window profiles. The SV 410 is very space-saving and convinces by an excellent p...[...details]

     

    SV 430

     

    Corner cleaning machine With the SV 430 we developed for you a very flexible weld seam cleaning machine for vinyl window profiles with a freely programmable CNC-axes-control convincing by an excellent price-performance-ratio and an optimal adaptation to y...[...details]

    SV 530-B

     

    CNC Cleaning machine With the SV 530-B we developed for you a very flexible weld seam cleaning machine for vinyl window profiles with a freely programmable CNC-axes-control convincing by an excellent price-performance-ratio and an optimal adaptation to yo...[...details]

    SV 815/2

     

    CNC-controlled cleaning machine The CNC-controlled double-head welding machine SV 815/4 guarantees exact and especially efficient machining of vinyl window frames because the two machining stations and the practical arrangement of the tools as well as the...[...details]

    SV 800/4

     

    Corner cleaning machine The CNC-controlled four-head welding machine SV 800/4 guarantees exact and especially efficient machining of vinyl window frames because the four machining stations help to avoid manual turning of the frames and the practical arran...[...details]

    SV 840/x

     

    CNC-corner cleaning machine The CNC controlled double-head corner cleaning machine SV 840/X guarantees a clean and rational processing of vinyl window frames. Due to the turnable tools, a turning of the frame is no longer necessary and the dynamic of the ...[...details]

    KFM 5000 / KFM 6000

     

    Contour machine With the KFM versions, we developed for you very reasonable contour cutting machines for the machining of inner corners with radii and inclinations at PVC profiles welded in an angle of 90°. With its productivity, quick functioning and ver...[...details]

    HAG 128

     

    Manual cleaning machine The manual cleaning device HAG 128 is a very reasonable alternative for cutting weld seams at inner corners of sash profiles or frame profiles. Due to its easy and manual handling the HAG 128 optimally meets your requirements. A sp...[...details]

    EBHZ

     

    Manual drilling device for corner brackets One touch of a button is enough and within seconds all drillings are precisely and perfectly made in one work cycle without any effort. The EBHZ is equipped with a 6-spindle drilling head to drill all 6 holes for...[...details]

    RF 1

     

    Radii milling machine for cutting off the weld seam at the inner corner of vinyl profiles - Pneumatic frame claming - Pneumatic milling feed in 2 levels, vertical and horizontal - Adjustable milling depth; so different groove depths are possible - no notc...[...details]

    SE 610, WS 630, SA 650

     

    Manual machines Our manual devices for milling and cutting off the weld seam are an excellent and cost-effective supplementation for your production and optimally adapt to your requirements. SE 610 Weld bead router small, hand-guided machine for milling a...[...details]

    MaHa

     

    Manual Corner Cleaning Device Works single-sided, universally useable for angles from 20° - 180°, and arched fittings. high groove quality, comparable with automatically produced grooves no run-off of grooving knife, even with extremely long grooves also ...[...details]

    HS 0272, HS 0573, HS 0576

     

    Manual grooving unit HS 0572 Manual grooving unit cutting length: 0-180 mm HS 0573 Manual grooving unit cutting length: 0-230 mm for removal of weld beads on PVC-window profiles in transom, cross and angle area stepless adjustable cutting length, separate...[...details]

    CC 6243

     

    CC 6243 - Combi Centre Consists of one 4-head welding machine AKS 6250-27/25 and one corner cleaning machine SV 430 incl. profile identification (PE), grooving knife top/bottom (NO/NU), inside grooving knife top/bottom (IO/IU), cutting/drilling unit top/b...[...details]

    CC 6253

     

    Combi Centre Horizontal production centre for vinyl window profiles consisting of a horizontal 4-head welding machine AKS 6250 and a CNC cleaning machine SV 530-B. Options: weld seam limitation of 0,2 mm, plus option for automatic plate adjustment of 0.2 ...[...details]

    CC 6443

     

    CC 6443 - Combi Centre Consists of one 4-head welding machine AKS 6400 and one corner cleaning machine SV 430 incl. profile identification (PE), grooving knife top/bottom (NO/NU), inside grooving knife top/bottom (IO/IU), cutting/drilling unit top/bottom ...[...details]

    CC 6453

     

    Combi Centre Horizontal production centre for vinyl window profiles consisting of a horizontal 4-head welding machine AKS 6400 and a CNC cleaning machine SV 530-B. Options: weld seam limitation of 0,2 mm, plus option for automatic plate adjustment of 0.2 ...[...details]

    ESB 210   FAS 320    
    Drilling unit for cross corner brackets
    The drilling unit ESB 210 allows you a very
    efficient drilling of the spot holes for cross...
    >>>>more
                   Assembly unit
    With the FAS 320 we developed a very flexible sash
    assembly station of high quality, convincing...
    >>>> more
       
    FBA 2500/2        

    Sash Assembly Station
    In this quality high-end sash assembly unit
    proven processing units have been combined...
    >>>> more

     

    SSA V1

     

    Screwing unit for locking parts The SSA V1is designed to screw fitting parts on wood, plastic and aluminium profiles. The basic version offers: ball guide rails cross-lasers to position the screw-driver Y-axis moving of the screw-driver by compressed air ...[...details]

    SSA V3

     

    Screwing unit for locking parts -a solid welded construction is the base of the SSA V3 -the smooth running slide can be provided with several screwdrivers depending on requirement; automatic feed by screw feed units -the screwing head is exactly adjusted ...[...details]

    EBHZ

     

    Manual drilling device for corner brackets One touch of a button is enough and within seconds all drillings are precisely and perfectly made in one work cycle without any effort. The EBHZ is equipped with a 6-spindle drilling head to drill all 6 holes for...[...details]

    ESB 210

     

    Drilling unit for cross corner brackets The drilling unit ESB 210 allows you a very efficient drilling of the spot holes for cross corner brackets with similar bores. The multi-spindle drilling head is individually adapted to the customer´s specifications...[...details]

    RBS

     

    Frame assembly station By integrating the frame assembly station RBS into your production you can considerably automate the mounting of fittings. Profit from the constantly high machining quality and from the enormous flexibility! The machine base is made...[...details]

    BT 1605, BT 2005, BT 2505

     

    Work tables for sashes (BT 1605, BT 2005, BT 2505) for the assembly of metal fittings and corner fittings pneumatic adjustment of the table inclination up to 15° counter hold by two individually adjustable casters profile protection by guide rails or felt...[...details]

    FAS 250

     

    FAS 250 - Sash assembly station With the FAS 250 we developed for you a flexible machine of high quality that convinces by its sensational price-performance ratio. The FAS 250 makes the assembly of fittings and corner brackets more efficient and easier. T...[...details]

    FAS 320

     

    Assembly unit With the FAS 320 we developed a very flexible sash assembly station of high quality, convincing by an optimal price-performance-ratio. The FAS 320 with automatic centering and clamping unit rationalizes and facilitates the fixing of hardware...[...details]

    FBA 2500/2

     

    Sash Assembly Station In this quality high-end sash assembly unit proven processing units have been combined: Pre-assembly station (FAS 250, FAS 320 or BMT 2500) followed by a double-axis screwing unit (FBA 2500/2) and extendable with a de-stacking unit (...[...details]

    FBA 2500/4

     

    Assembly unit with 4 axis Proven URBAN machining stations have been combined in this high-quality sash assembly unit: BMT 2500 (preliminary stop), FBA 2500 (4-axes screwing unit) and ST 1600 S (tilting table for discharge). With that we can offer you a qu...[...details]

    Automatic Glass Panel Logistics

     

    Automatic Glass Panel Logistics Automatic and in-time supply of all glass panels necessary for the glazing process. Sort and shelve function with automated conveyor tracks. Multiple scanners for the sorting and requesting of the glass panels are possible....[...details]

    KV 1800/KV 3200 HD 2000  
    Mounting, checking and glazing units
    for fixing the window element for
    glazing and control work...
    >>>> more
    Lift-and-turn tables
    for easy 360° turning of the
    elements...
    >>>> more
     
    ER KW 1600 S  

    Element shelf
    with compartments, for manual handling.
    This shelf is an excellent buffer ...
    >>>> more

    Commissioning trolley
    Mainly internal usage,
    support areas are coated...
    >>>> more

     
    STH 2500    

    Height adjustable tilting table
    move windows elements into correct
    machining position...
    >>>> more

     

    RA 3000

     

    Mounting, checking and glazing units for the preliminary assembly of frames and the mounting of sashes. stepless pneumatic height adjustment of up to 500mm via proven tackle technique frame clamping by two laterally adjustable flat clamping cylinder units...[...details]

    KV 1800, KV 3200

     

    Mounting, checking and glazing units for fixing the window element for glazing and control work. both clamping bars are pneumatically retractable below the table surface; that means: easy input and discharge solid basic construction guarantees high stabil...[...details]

    KV 2800 HF

     

    Mounting, checking and glazing units for fixing the window element for glazing and control work. both clamping bars are pneumatically retractable below the table surface; that means: easy input and discharge solid basic construction guarantees high stabil...[...details]

    KV 2750 S, KV 3750 S

     

    Mounting, checking and glazing units for fixing the window element for glazing and control work both clamping bars are pneumatically retractable below the table surface; that means: easy input and discharge rack guides for absolute angle precision very so...[...details]

    HS 10.1, HS 10.4

     

    Gasket trolley individually adjustable pick-up bars gasket trolley easily moveable due to 4 castor wheels (2 with brakes) easy moving and long lasting gasket support because of sleeve bearings ...[...details]

    AT 2000, AT 3000

     

    Work tables are allround work places. easy integration into production lines thanks to the adjustability of dimensions (table height 850-950 mm) floor roughness can be averaged out with insert legs slide or felt-protected bars grant gentle moving of the w...[...details]

    HD 2000, HD 2500

     

    Lift-and-turn tables for easy 360° turning of the elements. turn frame with nonskid rubber surface operator friendly as lifting cylinder (up/down) is controlled with foot switch long lasting with heavy pivot bearing construction...[...details]

    FLR 16

     

    Cut-to-measure rack stores reinforcements according to length. Transportable with fork lift. ...[...details]

    FL 800

     

    Cut-to-measure trolley low space consumption individual height adjustment good maneuvrability due to 4 castor wheels (2 with brake) ...[...details]

    LRE, LRD

     

    Storing shelf Storing shelf one-sided or double-sided Brochure...[...details]

    BW 1500, 2000

     

    Hardware trolley for sorting, storage and transportation of hardware. low space consumption flexible and good maneuvrability due to 4 castor wheels (2 with brake) Supplement variant: BW 2000 + BS 2000/BW...[...details]

    BW 10-LT

     

    Gear trolley for long fittings, vertical stroring 10 compartments 120 mm wide, 150 mm deep compartment height: 2000 mm ...[...details]

    BS 2000

     

    Gear cropper BS 2000 hydropneumatic punching thrust with integrated open cutting die maintenance unit, foot switch and table mounting ...[...details]

    FSK 48

     

    Rotary frame sorting unit used as buffer storage or turning transport during production. compartment deviders with special coating, to prevent profile damages turnable up to 360° long-lasting thanks to heavy pivot bearing execution...[...details]

    ER

     

    Element shelf with compartments, for manual handling. This shelf is an excellent buffer between two work places extension modules are available ...[...details]

    PWL 10, PWL 15

     

    Profile trolley facilitate profile transport. all profile supports with special coating to prevent profile damages all profile trolleys with 4 castor wheels (2 with brake) PWL 10 (approx. 80 bars), PWL 15 (approx. 150 bars)...[...details]

    PW 1600, PW 2000

     

    Profile trolley facilitate profile transport. all profile supports with special coating to prevent profile damages all profile trolleys with 4 castor wheels (2 with brake) profile transport horizontal profile support stepless adjustable...[...details]

    PSW 1600/3, PSW 1600/4

     

    Profile trolley suitable for optimized cuts. due to narrow grids large amounts of profile bars can be transported shelf devider with special coating to prevent profile damages easily maneuvrable due to 4 castor wheels (2 with brakes) ...[...details]

    RF 13/11

     

    Compartment trolley Compartment trolley for frames (for approx. 11 frames) grids vertically adjustable compartment distance 100 mm ...[...details]

    GF 13/24

     

    Compartment trolley Compartment trolley for glass (for approx. 24 disks) grid vertically adjustable compartment distance 35 mm ...[...details]

    FW 1800/5, FW 1800/16

     

    Compartment trolley distinct component transport easy to move due to weight saving construction Supplement variant: ...[...details]

    KW 1600

     

    Commissioning trolley Mainly internal usage. support areas are coated with felt high mobility due to weight saving design KW 1600/S encasble, space saving model...[...details]

    KW 1600 S

     

    Commissioning trolley Mainly internal usage. support areas are coated with felt high mobility due to weight saving design...[...details]

    KW 2000

     

    Commissioning trolley are designed for the internal and external transport of window elements. ...[...details]

    RT 13

     

    Roller table, horizontal used for fast through-put in production lines. the adjustability of table height from 850 - 950 mm facilitates integration into production lines insert legs level out any roughness of floor durable due to strong loadable castor ty...[...details]

    Rollenbahn vertikal

     

    Roller conveyor vertical / RV Series facilitates transportation of window elements. Individual grouping assembly possible: pre-fabricated machine parts systems durable due to strong loadable castor types ...[...details]

    Schiebetische

     

    Sliding tables 13 S 200, 13 S 300, 13 S 240, 13 S 340 used for fast through-put in production lines. the assembly parts system grants individual composition of length the adjustability of table height from 850 - 950 mm facilitates integration into product...[...details]

    ST 2400, ST 3000, ST 4000

     

    Tilting tables move windows from horizontal into vertical position and are therefore flexible allround work places. stepless, pneumatic adjustable tilting area from 100° to 180° easy removable roller conveyor (ST 4000 devided roller conveyor) profile prot...[...details]

    STH 2500, STH 3500

     

    Height adjustable tilting table move windows elements into correct machining position. From horizontal into vertical and from bottom to top position. stepless titting table area from 100° to 180° stepless height adjustable up to 500 mm...[...details]

    PR 1, PRD 1

     

    Testing units PR 1 for control purposes in production to avoid injuries there are additional safety limit switches at the door. that switch off the machine immediately when the door is being opened Jerk-free fracturing of the corner to be tested by a ram ...[...details]

    HTM 500

     

    Testing unit for measuring the temperature at the heating element from -20 to +400°C measurement accuray: +/- 1,5°C with calbration and testing certificate ...[...details]

    GVS

     

    GVS.jpg

    Glass bonding station

    The GVS represents an important development in the sector of vinyl window construction.
    In comparison to conventional production methods the gluing technology offers a lot of advantages.

    The glass panes are manually loaded before or after the gluing. The gluing process is CNC-controlled and fully automatic. Depending on the production process the bonding is either made in the sash or in the completed element. All customary adhesives can be processed (with one and two components)

    There are three common methods of bonding:

    • rebate base bonding
    • rebate base bonding glass edge
    • overlap bonding position 1
    • overlap bonding position 4

    General advantages of bonding frames and windows:

    • reinforcement of the sash is no more necessary
    • more incident light because of thinner profiles
    • better thermal property
    • the glass pane takes over most of the load
    • load reduction for the corner joints

    Working process:

    data input for the element

    • manually (touchscreen)
    • automatically by laser-supported measuring of the element
    • online processing by data record and scanner


    The adjustment for the nozzle`s travel speed and of the injection quantity is automatically adapted. All parameters like temperature of the adhesive, injection pressure, etc. are continuously monitored. The machine is secured by a light curtain and a fence.

    Brochure    
       

     

    10-PB-00

     

    Bending unit This model offers an ideal bending start-up and is designed for the bending of single arches and minimum series. A solid mechanical design as well as a manual operation allows everybody after a short training to produce round arches within ne...[...details]

    SMT-E

     

    special assembly table simple, for the rational assembly of roller casings onto window elements. pneumatically tiltable laterally extendable from 2000 to 3000 mm support grate height motively adjustable from 1100 to 2100 mm support height casing support m...[...details]

    WSK-3000, WSK-4000

     

    Slewing wall crane for chain tackle very ergonomical because of perfect smooth running low starting forces and quiet moving quick and simple assembly electrical energy supply, incl. main switch ...[...details]

    KZG-250, KZG-500

     

    Electric chain tackle ideal to insert loading forks or suction grippers as complement to slewing pillar crane and wall crane ...[...details]

    VM-170, VM 225

     

    Vacuum lifting device for the handling of glass panes and windows ergonomical operating lever with integrated control (chain tackle up/down, vacuum on/off vacuum pump with energy-saving automation the special arrangement of suction grippers allows the han...[...details]

    Suction holder

     

    Suspension with suction holder 2 x 1-head, diameter: 200 mm, with installed manual pump, suspension device, wire rope, eyes, capacity: 200 kg Brochure...[...details]

    Fork

     

    Fork 300 fork length: 300 mm, eyes: ø 40mm, height: 300 mm, width: 400 mm, length: 300 mm, loading capacity: approx. 250kg Brochure...[...details]

    432-25

     

    Glass cutting table for universal use with 1 manual longitudinall crushing ledge. max. glass dimension: 1600 x 3000 mm, table height: approx. 850 mm manually tiltable table plate (45° and 90° adjustable) 3 retractable glass support blocksmobile by two cas...[...details]

    435 G/LFB mit 100-5d

     

    Glass cutting table with air cushion tabletop coated with felt adjustment of the tabletop in vertical and horizontal final position manually tiltable tabletop with gas pressure springs as tilting support air cushion glass support ingots with attached pneu...[...details]

    490P/LFB/1Q+1L with 115-5d

     

    Tiltable glass-cutting table with air cushion incl. 1 transverse crushing ledge / 1lengthwise crushing ledge. pneumatically actuated crushing ledges table plate with black felt cover max. glass dimension 2250 x 3210 mm...[...details]

    428/2S/LFB/1Q+1L with 115-5d

     

    Glass-cutting table incl. 1 transverse crushing ledge / 1 lengthwise crushing ledge. pneumatically actuated crushing ledges automatic placing process via 2 retractable suction arms table plate with bleck felt cover...[...details]

    428/2S/LFB/1Q+1L with Prince

     

    Glass-cutting table fully automatic with air cushion. pneumatically actuated crushing ledges (transverse and lengthwise) fully automatic or manually controlled placing of the glass via 2 retractable suction arms (placing cycle approx. 60 seconds) table pl...[...details]

    M 1500 E

     

    Vertical washing machine with manual infeed 2000 mm, glass thickness from 3 to 14 mm self-adjusting, min. class dimension: approx. 300x250 mm, working height: approx. 550 mm, washing/drying module 1540 mm and a dirven discharge module with light barrier f...[...details]

    M 1600

     

    Vertical washing machine with automatic infeed and discharge of 3000 mm with Vulcollan rolls, washer made of steel, base made of stainless stell, closed at the top, length: approx. 2600 mm, 6 cylindrical nylon brushes and sound insulated high-pressure ven...[...details]

    M 2000

     

    Vertical washing machine with automatc infeed and discharge of 3000 mm with Vulcollan rollers, washer made of steel, base made of stainless steel, closed at the top, length: 2600 mm, 6 cylindrical nylon brushes and sound-insulated high-pressure ventilator...[...details]

    M 1602

     

    Semi-autom. washing line for glass with roller press with automatic infeed and discharge of 3000 mm with Vulcollan rollers, washer made of steel, base made of stainless steel, closed at the top, length: 2600 mm, 6 cylindrical nylon brushes and sound-insul...[...details]

    M 2002

     

    Semi-autom. washing line for glass with roller press and tilting table with automatic infeed and discharge of 3000 mm with Vulcollan rollers, washer made of steel, base made of stainless steel, closed at the top, length: 2600 mm, 6 cylindrical nylon brush...[...details]

    M 1602 P

     

    Automatic washing line with flat press and tilt table and tilting table, with automatic infeed and discharge of 3000 m with Vulcollan rollers, washer made of steel, base made of stainless steel, closed at the top, length: 2600 mm, 6 cylindrical nylon brus...[...details]

    M 2002 P

     

    Automatic washing line with flat press and tilt table and tilting table, with automatic infeed and discharge of 3000 mm with Vulcollan rollers, washer made of steel, base made of stainless steel, closed at the top, length: 2600 mm, 6 cylindrical nylon bru...[...details]

    M 1602 PA

     

    Automatic washing line with flat press and tilt table with automatic infeed and discharge of 3000 mm with Vulcollan rollers, washer made of steel, base made of stainless steel, closed at the top, length: 2600 mm, 6 cylindrical nylon brushes and sound-insu...[...details]

    M 2002 PA

     

    Automatic washing line with flat press and tilt table with automatic infeed and discharge of 3000 mm with Vulcollan rollers, washer made of steel, base made of stainless steel, closed at the top, length: 2600 mm, 6 cylindrical nylon brushes and sound-insu...[...details]

    M2 CA 50

     

    Water demineralizer semi-automatic water demineralizer suitable for washing machines M 1500 E. ...[...details]

    M2 CA 75

     

    Water demineralizer semi-automatic water demineralizer, suitable for washing machines M 1600 E. ...[...details]

    M2 CA 100

     

    Water demineralizer semi-automatic water demineralizer, suitable for washing machines M 2000 E. ...[...details]

    M 134

     

    Automatic transport for profiles of distance pieces simple profile transport for distance pieces dimensions: 3500 x 2500 x 2500 mm max. profile dimensions 2800 x 2100 mm voltage: 230 V with frequency converter ...[...details]

    M 132

     

    Automatic profile bending machine with profile compartments for the profiles for manual load, possibility to store angulars and joints, collection point for residuals, 1 touch-screen PC control, data input directly via PC or via external US port, with mac...[...details]

    M 130

     

    Salt injection machine automatic and manual salt injectino with variable time adjustment, max. content of tank: 35kg. Automatic loading system from a 180 kg tank possible, simultaneous perforation and butyling of the profiles at the corners, vertical slie...[...details]

    M 118

     

    Spacer filling unit for up to 30 profiles Tank capacity: max. 30 kg, min. length: 60 mm, max. length: 4000 mm, approx. dimensions: h=1500 mm, w=500 mm, l=2300 mm, weight: 80kg. Pneumatic connection: max. 6 bar. ...[...details]

    M 111

     

    Semi-automatic profile cutter, pneumatic with saw blade 230 mm, support 3 m and digital length stop with hand wheel for profile dimension from 80 to 2800 mm, pneumatic adjustment of the clamping pressure and of the saw blade feed, cutting of several profi...[...details]

    M 104/2,5

     

    Butyl machines electronically controlled with auxiliary thermostat, hydr. butyl application, pneumatic profile clamping stepless, adjustable working speed and butyl quantity, pneumatic clamping device for transport belt, self-adjusting, digital indication...[...details]

    M 104/7

     

    Butyl machines electronically controlled with auxiliary thermostat, hydr. butyl application, reinforced hydraulic cylinder, two independent pneum. clamping devices, steplessly adjustable working speed, adjustable butyl quantity and working pressure, pneum...[...details]

    S 97

     

    Pneumatic 2K measuring and mixing system appropriate for 200 l barrels of Thiocole (PU,PS SI), double-acting piston pump with pneumatic control. The basic equipment comprises the relay control with overpressure and material quantitiy security disconnectio...[...details]

    M 100

     

    Hot Melt extruder sealing extruder for a 10 l block, manual application of the secondary sealing (HOT-MELT), with electronic adjustment, digital display and spray gun, Approx. dimensions: h=700 mm, w=420 mm, l=650 mm, weight: 70 kg, voltage 400V/50 Hz. ...[...details]

    M 101

     

    Hot Melt extruder sealing extruder for a 10 l block, manual application of the secondary sealing (HOT-MELT), with electronic adjustment, digital display and spray gun, Approx. dimensions: h=700 mm, w=420 mm, l=650 mm, weight: 70 kg, voltage 400 V/50 Hz. ...[...details]

    Ecostar 250

     

    Dosing and mixing device appropriate for 200 l barrels of Thiocole (PU,PS SI), double-acting piston pump with hydraulic control. The basic equipment comprises the relay control with overpressure and material quantitiy security disconnection. The special d...[...details]

    M 116

     

    Sealing table (turnable) with 5 suction plates min. measure: 150 mm x 150 mm max. measure: 2000 mm x 1600 mm, rotation conmutable from 90° to 360°, operating speed can be adjusted steplessly, approx. dimensions: h=850 mm, w=500 mm, l=700 mm,...[...details]

    MIG

     

    Mixer for 2.5kg compound container for mixing 2 components: sealant material Thiokol (polysulphide) in 2.5 kg tin compound D=162 mm, height=180 mm. The mixing time is regulated via a time switch and a hoot. ...[...details]

    M 122

     

    Bending equipment Suitable for various widths, with manual winch, all radii can manually be adjusted, table device. Brochure ...[...details]

    2 K

     

    Manual spray gun – Thiokol with a vacuum suction and pressure device the mixed material can be processed cleanly and easily. (for mixing you can use the mixer MIG) Incl. accessories: 3 m spiral hose, 2 hand trowels 30 mm and 60 mm wide, 3 rubber noz...[...details]

    HKP

     

    Manual glass edge press is used for pressing and rolling the panes when sealing the spacer, the contact pressure can be adjusted via pressure regulator. Brochure ...[...details]

    RSM

     

    Electric hand rim de-coating machine for the grinding-off of the coating in the rim area, LOW-E glasses for the production of insulating glass. Simple grinding off also with special forms (convex/concace), electronical and stepless regulation of grinding ...[...details]

    NF 1

     

    Freezer for Thiocole unit S 97 and ECOSTAR 250. Disconnects the hardening of two components with cooling and heating zone, ready for operation with cooling medium, required for the operation of the Thiocole unit! ...[...details]

    SA 950/270 Lk

     

    Stationary compressor unit for 30 units 916 l/min, suction capacity = 680 l effective, pressure 10 bar, 2 cylinders, belt-driven, only 845 rpm = also very suitable for longer running times, 5.5 kW, 400 V, mounted on a 270 l tank. Incl. star-delta switch (...[...details]

    SA 950-10 Stdry

     

    Stationary compressor unit mounted on a horizontal 270 l tank with mounted dryer and automatic tank drainage = everything piped = simple. Installation 916 l/min suction capacity = 680 l/min effektive, pressure 10 bars, 2 cylinders, belt driven, only 845 r...[...details]

    AKS 1200

     

    URBAN 2 head welding machine weld seam limitation to 2.0 mm, with gasket moulder (with Lfd-Nr. 1053) Year of construction: 1996 Delivery time: upon request ...[...details]

    AKS 4105

     

    URBAN 2 head welding machine with gasket moulder (Lfd-Nr. 1053) Year of construction: 1986 Delivery time: upon request ...[...details]

    AKS 6105/4 35/25

     

    URBAN 4 head welding machine RA (Lfd-Nr. 1011) Year of construction: 1998 Delivery time: upon request ...[...details]

    TBA

     

    Conveyor belt several sizes upon request ...[...details]

    SV 305

     

    URBAN Schweißraupen-Verputzmaschine mit Inneneckbearbeitung und Schrägen, Fräswellenaufnahme für 3 Fräsersätze (Lfd-Nr. 1068) Baujahr: 2010 Lieferzeit: Auf Anfrage...[...details]

    WT 660

     

    Turning station Process flow direction and models upon request. ...[...details]

    AKFM 250/2S

     

    End milling machine for milling both sides of vinyl window profiles under 90°, machine stand: 3.8 m long, left milling unit fix, right milling unit mobile, 2 three-phase motors with 2 quick change spindles, D=40 mm, effective length: 120 mm, hydropneumati...[...details]

    VC 721

     

    V-cut saw 2 motors for V-cuts up to max. 140 mm, pneum. advance, pneum. clamping, no stop. Show room machine Delivery time: upon request ...[...details]

    Schulten

     

    Frame stop Year of construction: 2004 Delivery time: upon request ...[...details]

    DB 1000

     

    Dowel hole drill advance unit incl. base ...[...details]

    KMW

     

    CNC Corner cleaning machine incl. turning station Type: APH-Li (Lfd-Nr. 947) Time of construction: 2008 Delivery time: upon request...[...details]

    30 Units

     

    Plant model for 30 window units per day ...[...details]

    60 Units

     

    Plant model for 60 window units per day ...[...details]

    120 Units

     

    Plant model for 120 window units per day...[...details]

    240 Units

     

    Plant model for 240 window units per day...[...details]


    Urban Vietnam | ANS Vietnam

     
     
     
     
     
     
     
     

    ANS Vietnam (Anh Nghi Son Service Trading Co., Ltd.)
    Add: 135 Đường số 2, Khu Đô Thị Vạn Phúc, P. Hiệp Bình Phước, Q. Thủ Đức, TP. HCM, Việt Nam
    Tel: 028 3517 0401 - 028 3517 0402 - Fax: 028 3517 0403 - HotLine: 0911 47 22 55
    Email:  support@ansgroup.asia;
    Website: anhnghison.com